Day Chuu - The Shopping List

Tools:

$10 - Soldering Iron + Solder
$70 - Jigsaw + Fine tooth blades (for metal or plastics)
Free- Drill + Drill bits + 1 in Hole Saw
Free - C - Clamps
$10 - Hot glue gun + Hot glue

Sub-Total $90

Materials

$5 - Pine shelving wood
$3 - Hardboard
$13 - Acrylic Sheet (0.080 in)
$8 - Frosted Glass Spray
$5 - Matte Black Spray Paint
$5 - Con-Tact paper
$8 - Aluminium Knobs

Sub-Total $50

Electronics

$1 ea - 12 ppr Mechanical Encoders (No detents) 25mm shaft x2
$1 ea - 24 ppr Mechanical Encoders (No detents) 25mm shaft x2
22 c ea - Blue LEDs x20
22c ea - Red LEDs x5
60c ea - 10kohms Resistors x10
65c ea - TIP31C Transistor x 3
$4 ea - 3.5mm Audio cable x1
$25 ea - Arduino Leonardo x1

Sub-Total $ 42


Push Buttons Buttons:

$7 - 44mm Square buttons x4
$8 - 23.4mm x 33.0mm Rectangular buttons x2
$7 - 25mm Small Square button x1

Cool thing was, they came with Cherry Switches. After some testing, I also figured out that the springs are 150g, with 50g switches; pretty close to the 100g 50g arcade standard.

Sub-Total $50

Total: $232
Total without tools: $142 (not bad)